2022 Tesla Model X recalls

The driver-side liner from a WeatherTech Custom Fit FloorLiner first-row set, part 4416821, installed in a 2022 Tesla Model X Plaid bowed outward near the accelerator pedal. The set was purchased through Amazon on June 14, 2026, and sold by WeatherTech. On two separate occasions, I pressed the accelerator and it would not move normally because it caught against the bowed liner. When I pressed harder, it released and the vehicle surged forward abruptly. No one was in front of the vehicle, and I stopped without a collision. My wife was frightened by the sudden movement and did not initially understand what happened. We identified the liner interference, removed the liner and notified WeatherTe

Dear NHTSA Safety Investigation Team, I am filing an urgent safety complaint regarding dangerous and premature inner-edge rear tire wear on my 2022 Tesla Model X. I have already been forced to replace five tires due to excessive inner-edge wear, which I believe is caused by improper rear suspension camber. Despite repeatedly raising this concern, Tesla has failed to provide a permanent solution. This is a critical safety hazard, not routine tire wear. The damage occurs on the inner edges of the tires, making it difficult to detect and creating a serious risk of sudden tire failure, loss of vehicle control, and potentially catastrophic highway accidents. Similar complaints from other Model X

The left and right turning signal buttons work intermittently. I would tap on the buttons but they would not turn on the corresponding signal for other drivers to see. I would tap on the buttons multiple times if the initial press fails, but that does not help. I usually resort to turning on the hazard lights and slowly make the needed vehicle turn. This is a hazard to myself, my occupants, and all driving around me.

I own a 2022 Tesla Model X. I began noticing a creaking/clicking noise from the front steering/suspension area, particularly when turning the steering wheel at larger angles and at low speeds. I brought the vehicle to a Tesla Service Center for inspection. Tesla inspected the vehicle and diagnosed a bent steering rack/steering component. Tesla recommended replacement of the complete steering gear assembly, along with repairs to front suspension components. Tesla provided photographs of the condition and stated in writing that bending this component would require approximately 4,000 to 6,000 pounds of force at a specific angle. Tesla attributed the condition to an external impact. However, I

CRITICAL FLUIDITY/ACCESSIBILITY DEFECT The vehicle lacks a standard mechanical horn assembly, instead it is equipped with a small electronic button. This configuration creates a severe safety hazard due to the following critical failure points: High-Stress Unusability: The button is highly difficult to locate during an unfolding emergency, causing a dangerous delay in driver reaction time. Loss of Function During Maneuvers: When the steering wheel is actively turning, the button's position shifts constantly, making it physically impossible to find or press reliably while evasive steering is underway. Failure to Warn: This design directly compromises the driver's ability to sound an immediate